TPO Accessories 2018-07-04T12:06:06+00:00
T-Joint Patches
Sealer Pocket
Walkway Rolls
Fluted Corner
Inside Corners

EverGuard ® TPO Accessories TPO Roofing Components

The GAF EverGuard ® TPO single-ply roofing system includes an extensive line of EverGuard ® TPO flashing accessories for use with EverGuard ® TPO roofing systems. EverGuard ® flashing accessories are heat welded to the EverGuard ®roofing membrane. They are easy to install and provide secure protection from roof edge to parapet to penetration to wall. The following EverGuard ® TPO flashing accessories are available grey unless otherwise noted.

Preformed Vent Boots

Description

  • 75 mil molded membrane

Benefit/Application 

  • One standard size accommodates
    most common pipes and conduits
    boots can not be used
  • Supplied with stainless steel
    clamping rings

Quantity/Size

  • Fits 25mm – 152mm (1” – 6”) diameter pipes
  • 6 Vent Boots per carton

Weight

  • 4.5kg (9 lbs) /carton

Preformed Corners

Description

  • 60 mil thick molded membrane

Benefit/Application 

  • Universal style corner accommodates
    both inside and outside corners of base and curb flashings

Quantity/Size

  • 102mm x 102mm with 152mm flange ( 4 x 4” x 6”)
  • 20 Corners per carton

Weight

  • 3kg (6 lbs) /carton

UN-55 Detailing Membrane

Description

  • 55 mil thick unreinforced membrane
  • Light gray colour

Benefit/Application 

  • Alternative flashing/reinforcement material for penetrations and corners
  • Required wherever preformed vent
    boots cannot be used

Quantity/Size

  • 610mm x 15m (24” x 50’) roll

Weight

  • 14kg (28 lbs) /roll

TPO 45 mil Utility Flashing Strip

Description 

  • 45 mil thick reinforced membrane
  • Light gray colour

Benefit/Application

  • Use for stripping in coated metal flanges

Quantity/Size

  • 203mm x 30m (8” x 100’) roll

Weight

  • 18 lbs/roll

Coated Metal Sheets

Description

  • 24 gauge steel with a 25 mil thick membrane film
  • Light gray colour


Benefit/Application

  • TPO membrane is laminated to
    galvanized sheet metal
  • Cuts and forms like standard sheet metal
  • Field and flashing TPO membrane heat welds directly to coated metal
  • For metal gravel stop and drip edges, metal base and curb flashing, sealant pans and scupper sleeves

Quantity/Size

  • 102mm x 3m (4” x 10’) sheets
  • 10 or 30 sheets per pallet

Weight

  • 24kg (47 lbs) /sheet

UN-55 T-Joint Cover Patches

Description

  • 55 mil thick unreinforced membrane

Benefit/Application 

  • Conforming membrane seal for use over T-Joints in 60 and 80 mil
    membrane applications

Quantity/Size

  • 100 patches per box

Weight

  • 4.5kg (9 lbs)

Cut Edge Sealant

Description

  • Solvent-based liquid sealant
  • Clear

Benefit/Application 

  • Sealant provided in squeeze-bottle
    for use sealing all cut reinforced edges

Quantity/Size

  • 560ml (1 pint) bottle
  • 12 bottles/carton
  • 100 lineal feet per pint @ 1/8”
    diameter bead

Weight

  • 12kg (24 lbs) /carton

Walkway Rolls

Description

  • 125 mil extruded and embossed TPO
  • Gray Only

Benefit/Application 

  • Herringbone traction surfacing in
    gray color
  • Available in rolls
  • Heat welds directly to membrane or installed with seam tape

Quantity/Size

  • 760mm x 15m (30” x 50’)

Weight

  • 59kg (118 lbs) /roll

Preformed Split Pipe Boots

Description  

  • Boots are fabricated from 45 mil thick reinforced TPO membranes

Benefit/Application

  • Three standard sizes are split to
    accommodate most common pipes
    and conduits

Quantity/Size

  • 6 Boots/carton
    Stock Sizes  25mm-50mm, 76mm-127mm, 152mm-203mm
    (1”-2”, 3”-5”, 6”-8”)
  • Special order Size  228mm-280mm   (9” – 11”)

Weight

  • 4kg (7.5 lbs)/carton
  • 4kg (7.5 lbs)/carton
  • 5.5kg (11 lbs)/carton
  • 5.5kg (11 lbs)/carton

RTA (Roof Transition Anchor) Strip

Description

  • 152mm x 30m (6” x 100’) 45 mil reinforced TPO membrane with pressure sensitive adhesive
  • White Only

Benefit/Application

  • To be installed on horizontal surfaces
    Using plates and fasteners as a base
    attachment in fully adhered and Freedom™ systems

Quantity/Size

  • 2 rolls/carton

Weight

  • 17kg (34 lbs)/carton

Corner Curb Wraps

Description 

  • Corners are fabricated from 45 mil thick rein-forced TPO membrane

Benefit/Application 

  • Four Standard sizes to flash curbs that are 610mm, 915mm, 1220mm, 1525mm (24”, 36”, 48” and 60”) in size.
  • Four corners are required to flash the curb.

Quantity/Size

  • 4 Curb Wraps/carton. Stock Sizes are: 343mm, 495mm, 648mm, 800mm (13.5”, 19.5”, 25.5”, 31.5”)
  • Special order sizes: 190mm, 952mm (7.5”, 37.5”)

Weight

  • 2.8kg   5.6 lbs/carton
  • 3.7kg   7.4 lbs/carton
  • 10.3kg 10.7 lbs/carton
  • 6.3kg   12.5 lbs/carton

Preformed Expansion Joint Covers

Description 

  • 60 mil thick reinforced TPO membrane
  • White Only

Benefit/Application 

  • 5 standard sizes to accommodate most applications
  • Two convenient styles available to accommodate both Roof-to-Roof and Roof-to-Wall applications.

Quantity/Size

  • Sizes are 102mm, 152mm, 203mm, 254mm, 305mm (4”, 6”, 8”, 10”, 12”) Bellows
  • 15m (50 foot) rolls

Weight

  • Ranges from 25-32kg (50-65 lbs).

EverGuard ® SA TPO Standing Seam Profile

Description

  • 25-38mm  wide x 25-32mm high x 3m   in length profile with pressure sensitive adhesive and release liner  (1-1/2 “)x (1-1/4”)x (10’)
  • White, Tan, Gray, Regal Red, Regal Blue, Hartford Green

Benefit/Application 

  • Applied over TPO roofing systems to simulate standing seam metal roof.
  • Factory applied adhesive and release liner for easy installation on primed surfaces.
  • Butt end aligned with dowels provided with the profiles

Quantity/Size

  • 3m (10’) lengths
  • 30 profiles/carton with
    connecting dowels

Weight

  • 23kg (47 lbs.)/carton

Freedom™ 5’-0” Dual HW (Heat Weld) Flashing

Description 

  • 45 mil and 60 mil reinforced membranes

Benefit/Application 

  • Eliminates wasted membrane because of the two HW edges.
  • 152mm (6”) HW edge allows for more flexibility and easier installation

Quantity/Size

  • 2.5m x 15m (5’ x 50’)

Weight

  • 37kg 76 lbs

EverGuard ® TPO Fluted Corner

Description 

  • 203mm (8”) diameter nominal 50 mil non-reinforced TPO membrane

Benefit/Application 

  • For use in flashing outside corners
    of base and curb flashings

Quantity/Size

  • 20 corners/carton

Weight

  • 1.5kg (3 lbs)/carton

Square Tube Wraps

Description

  • Square tube wraps are fabricated from 45 mil thick reinforced TPO membrane

Benefit/Application 

  • Fast efficient alternative to field
    fabrication
  • Tube wraps are split with a designed
    overlap so they can be wrapped
    around square or rectangular tubing
    and ensure a solid weld
  • Available in three standard sizes

Quantity/Size

  • 6 Tube Wraps per carton Three Sizes
    102x102mm, 102x152mm, 152x152mm
    4” x 4”, 4” x 6”, 6” x 6”

Weight

  • 3-3.5kg (6-7 lbs)/carton

Inside Corners

Description 

  • Inside Corners are formed using unreinforced membrane to a nominal 50 mil thickness

Benefit/Application 

  • Manufactured to accommodate
    inside corners of base and curb
    flashings
  • Designed for ease of welding in
    tight areas

Quantity/Size

  • 20 Corners per carton
    152x152mm x 133mm
    6” x 6” x 5 1/4”

Weight

  • 1.75kg 3(.5 lbs)/carton

Pourable Sealer Pocket

Description  

  • Pourable Sealer Pocket is molded with TPO compound to a nominal 70 mil thickness
  • White Only

Benefit/Application

  • Provides a structural foundation for
    application of EverGuard ® Pourable
    Sealant with primer or a non-shrinking grout
  • Lower cost than coated metal
    fabricated pockets
  • Ideal for waterproofing irregular shaped roof penetrations

Quantity/Size

  • 6 Pockets per carton
  • 229x152mm x 102mm with 76mm base flange
    (9” x 6” x 4” base 3”)

Weight

  • 3.25kg (6.5 lbs)/carton

Drain

Description

  • Spun Aluminum drain pre-flashed with 55 mil unreinforced TPO membrane
  • White Only

Benefit/Application

  • For use in waterproofing low slope roof drains
  • Fast efficient alternative to field
    fabrication

Quantity/Size

  • 3 Drains per carton
  • 10 sizes available: 38, 51, 63, 76, 89, 102, 114, 127, 140, 152mm (1 1/2” to 6”)

Weight

  • 1.8kg (3.70 lbs)/carton

Scupper

Description

  • Manufactured out of TPO Coated Metal and 55 mil unreinforced membrane
  • White Only

Benefit/Application

  • For use in waterproofing wall
    scuppers
  • Eliminates unnecessary flashing to
    waterproof the wall opening

Quantity/Size

  • 2 Scuppers per carton
    102x152x305mm, 203x254x305mm  (4” x 6” x 12”, 8” x 10” x 12”)

Weight

  • 2.5-4.5kg (5-9 lbs)/carton

Vent

Description

  • Manufactured out of reinforced 45 mil TPO membrane and galvanized steel
  • White Only

Benefit/Application

  • For use in venting low slope mechanically attached roofs
  • Limited to one-way flow to avoid moisture buildup within the roofing structure and material

Quantity/Size

  • 2 Vents per carton

Weight

  • 6kg (12 lbs)/carton

TPO Color Membranes

Description 

  • Manufactured from 45, 60 and 80 mil reinforced membrane in Regal Blue, Hartford Green and Regal Red

Benefit/Application 

  • Great for roofs that are accessible
    or visible to building occupants.
  • Custom colors can complement
    traditional shingle installations.
  • A low cost alternative to metal roofing when used with color matching standing seam profiles.

Quantity/Size

  • 1.5m x 30m and 3m x 30m  roll sizes (5’ x 100’ and 10’ x 100).
  • Detail membranes in 610mm x 1270mm rolls(24” x 50”).
  • Flashing membranes in 203mm x 30m rolls (8” by 100’).

Weight

  • Various by membrane type, length/width and thickness

Please Note:

 

1. Mass and dimensions stated are nominal unless otherwise indicated.

2. Store accessory flashing materials in original carton, rolls, or sheets on pallets or shelving in a dry area.

3. Accessory stocks should be rotated in a first-in, first-out manner.

Call for a quote today 0800 42 33 55